From the manufacturer
Makita HR2631F/1 110V 26mm SDS-Plus AVT Rotary Hammer
Makita HR2631F/1
HR2631F/1 Capacity:
- Maximum capacity in concrete with TCT bit 26mm
- Maximum capacity in concrete with TCT core 68mm
- Maximum capacity in concrete with diamond core 80mm
- Maximum capacity in wood 32mm
- Maximum capacity in steel 13mm
- 110V machine with yellow 110V 3 pin plug
The HR2631F/1 has a depth gauge for increased drilling consistency, recessed lock on button for continuous use, 40 bit angle settings to allow the bit to be set at optimum positions and a built in LED job light to illuminate the work area.
The Makita HR2631F/1 110V 26mm SDS-Plus AVT Rotary Hammer features anti-vibration technology (AVT) and torque limiter to stop the drill if the bit jams or hits against a reinforcement.
HR2631F/1 110V 26mm SDS-Plus AVT Rotary Hammer supplied in a Carry Case
The Makita HR2631F/1 110V 26mm SDS-Plus AVT Rotary Hammer has a powerful 800 watt motor, with variable speed controlled by trigger to allow the user to adjust the speed to the application and materials, to deliver up to 1,200 rpm, 4,600 ipm and 2.4 joules of impact energy for fast drilling. 110V machine with yellow 110V 3 pin plug.
Please Note:
The Makita HR2631F/1 110V 26mm SDS-Plus AVT Rotary Hammer is equipped with 3 mode operation for rotation only, hammering with rotation or hammering only, one touch sliding chuck for quick and easy bit installations and removals and an operation mode change lever which enables the switch from rotation to hammering mode and hammering mode to rotation without rotating the chuck.
Amy –
Great drill for the money , light weight and good power
Ritchie F –
Nice piece of kit. well worth the price. top banana I had the 110v version, used it every week, it’s had some abuse but still keeps going, proppersite tool
Tim Simmons –
A good drill if you want to buy it for Europe, not in the UK
Platinum 1234 –
Absolutely load of crap for daily use i ordered two, thinking Makita decent make,, one sent back to seller after few weeks as developed a fault eventually returned but still faulty so returned again and eventually got one refunded,,Second one died today handle snapped clean off whilst in use so through it in the skip!! baring in mind it’s drilling holes and chipping off 60 year old render!!My advise is if you like me are in the building industry don’t waste your money buy one that’s got a bit more to it this sds is definitely DIY ONLY
Ray –
Does the job
If you do a lot of drilling in concrete or have deep holes get an sds hammer drillThe time it saves you will pay for the drill
六水 –
狭いところで使えてハツリ機能が有る所が一番。
パワーもそこそこあるから、かなり使えると思う。
MoeC –
Works great
I bought this and used it to drill about 200 5/32 holes in cinder block. It worked great. The tool is light enough to use one handed (gasp!)
Mark Laro –
nice
Nice little hammer drill. Hits like a big hammer
Juan carlos –
Muy bueno
Lo utilise para demoler tile ,ni pude aver e ho una mejor conpra
MMM –
手ごろな価格で、コンクリートの穴あけも可能で初めて使うにはすごくいい。
本当は今すぐに必要がなく、バッテリータイプを検討していました。しかし、急遽必要になったので初めてなので安めのこちらにしました。さすがに分厚いコンクリートのはつりは大変無理があると思いますが、小さいエリアなら５ｃｍ厚でも可能でした。コンクリートに１２ｍｍ径の穴をあけましたが、普通のドリルとハンマードリルのパワーの違いに驚きました。電源コードの不便さはありますが、使用頻度も少ないのでよしとします。安いのでバッテリータイプが必要となったら買い換えようと思っていましたが、それはないかもしれません。